Rockwell model 9 for sale on US's largest classifieds sites (72 results)

On page
20
$120.00

Table Saw - Rockwell 9 in. - $120 (Madisonville)

Used Table Saw - Rockwell 9 in. - $120 (Madisonville) in HOPKINSVILLE, KY, USA
2 months ago
HOPKINSVILLE,KY
Table Saw - Rockwell 9 in. - $120 (Madisonville)

Runs and is in good shape. Model 34-580120VSeries 34-57060Hz12.6 Amps

$120.00
 
 

$160.00

Table Saw - Rockwell 9 in. - $160 (Madisonville)

Used Table Saw - Rockwell 9 in. - $160 (Madisonville) in HOPKINSVILLE, KY, USA
2 months ago
HOPKINSVILLE,KY
Table Saw - Rockwell 9 in. - $160 (Madisonville)

Runs and is in good shape. Model 34-580120VSeries 34-57060Hz12.6 Amps

$160.00
 
 

$450.00

Rockwell Delta Super 900 Radial Saw - $450 (Olympia)

Used Rockwell Delta Super 900 Radial Saw - $450 (Olympia) in PORT ANGELES, WA, USA
2 months ago
PORT ANGELES,WA
Rockwell Delta Super 900 Radial Saw - $450 (Olympia)

This is a Delta Super 900 Radial Saw with a 9 blade. Work table is included, along with an installation and operation manual for the radial saw. This Delta Super 900 Radial Saw is in good working condition. 1 HP and 3450 RPM. It runs with 115 volts or 230 volts. The model number is M-10027. The serial

$450.00
 
 

$650.00

Rockwell Shaper model 43-340 220V - $650 (Newtown)

Used Rockwell Shaper model 43-340 220V - $650 (Newtown) in NEW YORK, NY, USA
2 months ago
NEW YORK,NY
Rockwell Shaper model 43-340 220V - $650 (Newtown)

Solid, classic Rockwell manufacturing - 2HP, 3450 RPM Rockwel Shaper with the finishing arm Pick Up is available at Dads Consignment located at 317 South Main Street Route 25 in Newtown, CT. Retail hours are 10-6 Tuesday - Friday and 9-4 Saturdays. After hours pickups also available by appointment. L

$650.00
 
 

$800.00

91 Ford Quad Cab in good shape CAB ONLY complete with interiordoors - $800 (Covelo)

Used 91 Ford Quad Cab in good shape CAB ONLY complete with interiordoors - $800 (Covelo) in MENDOCINO, CA, USA
2 months ago
MENDOCINO,CA
91 Ford Quad Cab in good shape CAB ONLY complete with interiordoors - $800 (Covelo)

I have a 91 Ford F350 Cab and Doors in really good shape it is a lariat model, good for use in Rock Crawler Build, I was going to put this truck up on 2.5 ton rockwell axles and make a mega truck out of it. Cab only, axles and running gear are already sold, do have the bed that is in good shape with

$800.00
 
 

$1,250.00

9 South Bend precision lathe - $1250 (ontario)

Used 9 South Bend precision lathe - $1250 (ontario) in RIVERSIDE, CA, USA
2 months ago
RIVERSIDE,CA
9 South Bend precision lathe - $1250 (ontario)

9 South Bend precision lathe Model A. 3 phase, 12 h.p., 1725 r.p.m. Catalog 344zn, bed length 3 12 feet. Comes with some tooling and an extra head. $1250.00 Robert .0122American, american woodworking, boice crane, bridgeport, buffalo, buss, canedy otto, carlton, cincinati, clausing, clement, collada

$1,250.00
 
 

$125.00

GOOD USED ROCKWELL TABLE SAW - $125

Used GOOD USED ROCKWELL TABLE SAW - $125 in DUBUQUE, IA, USA
2 months ago
DUBUQUE,IA
GOOD USED ROCKWELL TABLE SAW - $125

good used rockwell model 9 table saw

$125.00
 
 

$160.00

Table Saw - Rockwell 9 in. - $160 (Madisonville)

Used Table Saw - Rockwell 9 in. - $160 (Madisonville) in HOPKINSVILLE, KY, USA
4 months ago
HOPKINSVILLE,KY
Table Saw - Rockwell 9 in. - $160 (Madisonville)

Runs and is in good shape. Model 34-580120VSeries 34-57060Hz12.6 Amps

$160.00
 
 

$12,000.00

9pc MACHINERY WOODSHOP SET - $12000 (WEST SALEM)

Used 9pc MACHINERY WOODSHOP SET - $12000 (WEST SALEM) in SALEM, OR, USA
4 months ago
SALEM,OR
9pc MACHINERY WOODSHOP SET - $12000 (WEST SALEM)

1 Delta Milwaukee 12x5 Stand up Planar with Stand.1 Delta Rockwell 4 in Planar with Metal Stand and 13 HP Motor 1725 RPMS.1 Delta Rockwell 6 in Planar with custom made Stand and 1 HP Motor 3450 RPMS.1 Duro Joiner with Craftsman 12 HP motor and Stand. 1 DeWalt AMF Bench Top Radial Arm Saw with Stand a

$12,000.00
 
 

$50.00

Rockwell Shop table saw - $50 (Wake forest)

Used Rockwell Shop table saw - $50 (Wake forest) in RALEIGH, NC, USA
4 months ago
RALEIGH,NC
Rockwell Shop table saw - $50 (Wake forest)

For sale is a model 9 contractors table saw. This beast is heavy and built to last. Everything works, just needs a new blade. Uses 8 inch blades. please call or text jeremy at 774-three nine two-1476

$50.00
 
 

$450.00

Rockwell Delta Super 900 Radial Saw - $450 (Olympia)

Used Rockwell Delta Super 900 Radial Saw - $450 (Olympia) in PORT ANGELES, WA, USA
4 months ago
PORT ANGELES,WA
Rockwell Delta Super 900 Radial Saw - $450 (Olympia)

This is a Delta Super 900 Radial Saw with a 9 blade. Work table is included, along with an installation and operation manual for the radial saw. This Delta Super 900 Radial Saw is in good working condition. 1 HP and 3450 RPM. It runs with 115 volts or 230 volts. The model number is M-10027. The serial

$450.00
 
 

$26,500.00

PRODUCE TRUCK DOUBLE L MANUFACTURING - $26500 (LUBBOCK)

Used PRODUCE TRUCK DOUBLE L MANUFACTURING - $26500 (LUBBOCK) in CLOVIS, NM, USA
4 months ago
CLOVIS,NM
PRODUCE TRUCK DOUBLE L MANUFACTURING - $26500 (LUBBOCK)

1991 FREIGHTLINER 3306 B CAT 9 SPEED ROCKWELL TRANSMISSION ,12,000 FRONT 40,000 REARS INTER-AXLE DIFFERENTIAL LOCK AIR SHIFT P.T.O. 1100 X 22.5 FRONTS 42565 R 22.5 REARS, SPRING RIDE SUSPENSION AC AND HEAT 541,200 MILES SINGLE FUEL TANK. DOUBLE L MANUFACTURING MODEL 902 PRODUCE BED, ELECTRICHYDRAULIC

$26,500.00
 
 

$20.00

Rockwell table saw - $20

Used Rockwell table saw - $20 in WILMINGTON, NC, USA
11 months ago
WILMINGTON,NC
Rockwell table saw - $20

Selling Rockwell Model 9 Homecraft table saw. Works good.

$20.00
 
 

$250.00

Rockwell Saw-Jointer Combination - $250 (Blanco, Tx)

Used Rockwell Saw-Jointer Combination - $250 (Blanco, Tx) in SAN ANTONIO, TX, USA
1 year ago
SAN ANTONIO,TX
  Rockwell Saw-Jointer Combination - $250 (Blanco, Tx)

Model 9 Contractors Saw and Model 4 JointerGood working condition. Location Blanco, Tx

$250.00
 
 

Make offer

9 Rockwell Contractors Saw wprecision jointer - $600 (N SA)

Used 9 Rockwell Contractors Saw wprecision jointer - $600 (N SA) in SAN ANTONIO, TX, USA
1 year ago
SAN ANTONIO,TX
9 Rockwell Contractors Saw wprecision jointer - $600 (N SA)

Have an excellent condition saw with 4 jointer and heavy duty stand included Purchased new in the 80s and made in the USA. Housed and light homeowner use only No rust or damage and ready to use. 1hp,115volt motor 3450 rpm Model 7-290 Owners manual included Call 210-371-3833 Location N SA

Make offer
 
 

$500.00

9 Rockwell Contractors Saw wprecision jointer - $500 (N SA)

Used 9 Rockwell Contractors Saw wprecision jointer - $500 (N SA) in SAN ANTONIO, TX, USA
1 year ago
SAN ANTONIO,TX
9 Rockwell Contractors Saw wprecision jointer - $500 (N SA)

Have an excellent condition saw with 4 jointer and heavy duty stand included Purchased new in the 80s and made in the USA. Housed and light homeowner use only No rust or damage and ready to use. 1hp,115volt motor 3450 rpm Model 7-290 Owners manual included Call 210-371-3833 Location N SAPostingID35017

$500.00
 
 

$100.00

Rockwell Band Saw - $100 (katy tx)

Used Rockwell Band Saw - $100 (katy tx) in HOUSTON, TX, USA
1 year ago
HOUSTON,TX
  Rockwell Band Saw - $100 (katy tx)

Rockwell Band Saw 9 2.5 model RK7453Barely usedBought it for 180willing to negotiate Location katy tx

$100.00
 
 

$75.00

ROCKWELL MITER SAW - $75 (SPRING ,TX)

Used ROCKWELL MITER SAW - $75 (SPRING ,TX) in HOUSTON, TX, USA
1 year ago
HOUSTON,TX
  ROCKWELL MITER SAW - $75 (SPRING ,TX)

Rockwell 9 inch miter saw- Awesome vintage 9 inch model, runs good , good cond, 75.00 - 713-992-1064 Location SPRING ,TX

$75.00
 
 

Make offer

ROCKWELL MITER SAW - $100 (SPRING ,TX)

Used ROCKWELL MITER SAW - $100 (SPRING ,TX) in HOUSTON, TX, USA
1 year ago
HOUSTON,TX
ROCKWELL MITER SAW - $100 (SPRING ,TX)

Rockwell 9 inch miter saw- Awesome vintage 9 inch model, runs good , good cond, 100.00 - 713-992-1064 Location SPRING ,TX

Make offer
 
 

$125.00

ROCKWELL MODEL 9 TABLE SAW - $125 (COOKVILLE TEXAS)

Used ROCKWELL MODEL 9 TABLE SAW - $125 (COOKVILLE TEXAS) in TYLER, TX, USA
1 year ago
TYLER,TX
  ROCKWELL MODEL 9 TABLE SAW - $125 (COOKVILLE TEXAS)

ROCKWELL MODEL 9 HOMCRAFT TABLE SAW. 120 V. 12.6 AMP. ON ROLL A ROUND BASE. 903-241-4660 Location COOKVILLE TEXAS

$125.00
 
 

On page
20
0.00237634976705